the fourth axis, how to connect and configure USB controller

Motors, motor drivers, power supplies, ...

the fourth axis, how to connect and configure USB controller

Postby mokvo4 » 14 Mar 2017, 12:05

The fourth axis, how to connect and configure USB controller MK3 / 4, software PlanetCNC-TNG_20170305_beta

Product description
new 57 stepping motor, worm gear reducer, a slowdown of 20: 1
is a ship 80 for the cartridge 4;

feature description:
use a 57 step motor current is 3A
worm gearbox, 20: 1 speed ratio of the output torque is large.
simple structure, high precision, self-centering chuck is suitable for wood, metal, jade, and so on..

cartridge type:
Model: 80-4
Center height: 71 mm
overall height: 110 mm

fourth axis pulse setting:
the Mach3 system settings: 1 the extent necessary, the number of pulses
(1 lap driving pulse number of fines) 83019 on the perimeter
for example, two motor phase, fines 8 gear ratio 20: 1
1 set. depending on the angle
32000/360 (degrees) = 88.88888888 (counts)
2 schedule setting schedule length or circumference
32000 83019 (125.6 mm length) = 254.777 (counts)

1a.jpg
1a.jpg (106.18 KiB) Viewed 372 times
2a.jpg
2a.jpg (149.25 KiB) Viewed 372 times


what settings must be set in software PlanetCNC-TNG_20170305_beta?
I apologize for my English - machine translation
mokvo4
 
Posts: 5
Joined: 08 Mar 2017, 21:35
Location: Saint Petersburg
Controller: Mk3

Re: the fourth axis, how to connect and configure USB contro

Postby Support » 17 Mar 2017, 11:34

Support
 
Posts: 2655
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: the fourth axis, how to connect and configure USB contro

Postby mokvo4 » 17 Mar 2017, 12:21

Links for which you have specified for the axis: "X,Y,Z ", I'm interested in the rotary axis "A" options in the first post
mokvo4
 
Posts: 5
Joined: 08 Mar 2017, 21:35
Location: Saint Petersburg
Controller: Mk3


Return to Electronics



Who is online

Users browsing this forum: No registered users and 2 guests

cron