USB Контроллер и sh-ch30?

Motors, motor drivers, power supplies, ...

USB Контроллер и sh-ch30?

Postby santa » 11 Jul 2015, 13:47

ДОБРЫЙ ДЕНЬ ! вопрос следующий где брать сигнал <z-down> <z-up> на плате USB Контроллер шаговых двигателей 4х осевой TB6560HQ! для sh-ch30 чтобы с программы управлять sh-ch30! как sh-ch30 как дружить с программой?
santa
 
Posts: 5
Joined: 11 Jul 2015, 13:45
Controller: Other

Re: USB Контроллер и sh-ch30?

Postby Support » 13 Jul 2015, 08:42

Download user manual for your controller?
http://www.planet-cnc.com/index.php?page=download

Tutorial on how to connect controller with motor driver:
http://www.planet-cnc.com/faq/driver_opto/
Support
 
Posts: 2649
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: USB Контроллер и sh-ch30?

Postby santa » 14 Jul 2015, 10:04

Дело в том что плата китайская синяя да же управление подвигом :?: не знаю где брать сигнал!
santa
 
Posts: 5
Joined: 11 Jul 2015, 13:45
Controller: Other

Re: USB Контроллер и sh-ch30?

Postby Support » 14 Jul 2015, 10:48

Please post:

Picture of your controller
and
Picture of your motor driver
Support
 
Posts: 2649
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: USB Контроллер и sh-ch30?

Postby santa » 14 Jul 2015, 11:09

Вот фото контроллера и THC МОТОРЫ NEMA 23HC2430
Attachments
Image006.png
Image006.png (123.31 KiB) Viewed 1664 times
sh_30_1_800_2.jpg
sh_30_1_800_2.jpg (172.12 KiB) Viewed 1664 times
santa
 
Posts: 5
Joined: 11 Jul 2015, 13:45
Controller: Other

Re: USB Контроллер и sh-ch30?

Postby Moonglow » 14 Jul 2015, 14:24

Что-то мне подсказывает, что по китайскому клону МК1 тебе тут не помогут ;) :lol:
Moonglow
 
Posts: 104
Joined: 11 Jan 2012, 04:45
Controller: Many controllers

Re: USB Контроллер и sh-ch30?

Postby santa » 14 Jul 2015, 19:40

Moonglow wrote:Что-то мне подсказывает, что по китайскому клону МК1 тебе тут не помогут ;) :lol:

а где?
santa
 
Posts: 5
Joined: 11 Jul 2015, 13:45
Controller: Other

Re: USB Контроллер и sh-ch30?

Postby Support » 15 Jul 2015, 06:43

Yes, you have a Chinese counterfeit controller. It is difficult for us to support this controller since it is not our controller.

Please read the manual you received with this controller and see the pinout of the axis connectors. Since this is all in one controller you would only need to connect motors, limits switches PSU etc..

Try finding the documentation of this controller.
Support
 
Posts: 2649
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: USB Контроллер и sh-ch30?

Postby santa » 15 Jul 2015, 06:47

Support wrote:Yes, you have a Chinese counterfeit controller. It is difficult for us to support this controller since it is not our controller.

Please read the manual you received with this controller and see the pinout of the axis connectors. Since this is all in one controller you would only need to connect motors, limits switches PSU etc..

Try finding the documentation of this controller.

с подключением моторов вопросов нет есть вопрос где брать сигнал на поджигать дуги плазмы :?:
santa
 
Posts: 5
Joined: 11 Jul 2015, 13:45
Controller: Other

Re: USB Контроллер и sh-ch30?

Postby Support » 15 Jul 2015, 10:16

In documentation find where the output pins are located.
http://www.planet-cnc.com/faq/output_board/ set as ilustrated for -Mk1 controler
Support
 
Posts: 2649
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

USB Контроллер и sh ch30

Postby Lerakroxa » 01 Mar 2016, 22:29

You might try a 28/24AWG cable. Does anyone know what the USB charge rate is?
Lerakroxa
 
Posts: 1
Joined: 01 Mar 2016, 10:52
Location: Россия
Controller: Probotix Mk1


Return to Electronics



Who is online

Users browsing this forum: No registered users and 2 guests