Swapping Chinese Controller Board

Motors, motor drivers, power supplies, ...

Swapping Chinese Controller Board

Postby NS_Dave » 07 Aug 2017, 22:25

Hi. I'm very new to CNC. I'm trying to swap out the Chinese board with the Mk3/4 (4 axis) USB controller I purchased from Planet CNC. I can't find a wiring diagram anywhere. I've uploaded the pics of my current board. If anyone can tell me what goes where I'll be eternally grateful! Thanks.

Chinese Board
Front.jpg (208.06 KiB) Viewed 540 times

Chinese Board
Back.jpg (228.16 KiB) Viewed 540 times

Planet-CNC.jpg (131.96 KiB) Viewed 540 times

USB interface control box, pg 1
Capture.JPG (83.55 KiB) Viewed 540 times

USB interface control box, pg 2
Capture1.JPG (79.14 KiB) Viewed 540 times
Posts: 1
Joined: 07 Aug 2017, 13:46
Controller: Mk3

Re: Swapping Chinese Controller Board

Postby pip89289 » 04 Sep 2017, 00:21

Hi Dave, I'm new to cnc too, although I can't help you with your problem, would you mind showing me the wiring to the chinese controller that you have right now? The schematic that came with my kit does not include the controller and I can't find any instructions for it. Thanks!
Posts: 1
Joined: 03 Sep 2017, 00:29
Controller: Chinese clone

Re: Swapping Chinese Controller Board

Postby Support » 04 Sep 2017, 09:23

Posts: 2659
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Return to Electronics

Who is online

Users browsing this forum: No registered users and 1 guest