TB6600 upgraded stepper motordriver current limitation issue

Motors, motor drivers, power supplies, ...

TB6600 upgraded stepper motordriver current limitation issue

Postby bobdxcool » 17 May 2017, 11:06

Hi

I have interfaced this (https://www.banggood.com/TB6600-Upgrade ... 81997.html) motor driver to my NEMA34 motor. As advertised on the driver, it is not able to provide 4 amps to the motor. The maximum that it provides is 1.2 amps at which motor starts slipping. Tried different dip switch settings but still no change. Any advice on how to get this driver to provide 4 amps based on someone's experience of using it before.

Attached photos of driver.
Attachments
IMG_5109.jpg
IMG_5109.jpg (11.74 KiB) Viewed 219 times
IMG_5119.jpg
IMG_5119.jpg (11.5 KiB) Viewed 219 times
IMG_5120.jpg
IMG_5120.jpg (93.4 KiB) Viewed 219 times
bobdxcool
 
Posts: 2
Joined: 11 May 2017, 22:15
Controller: Other

Return to Electronics



Who is online

Users browsing this forum: No registered users and 1 guest