Swapping Chinese Controller Board

Motors, motor drivers, power supplies, ...

Swapping Chinese Controller Board

Postby NS_Dave » 07 Aug 2017, 22:25

Hi. I'm very new to CNC. I'm trying to swap out the Chinese board with the Mk3/4 (4 axis) USB controller I purchased from Planet CNC. I can't find a wiring diagram anywhere. I've uploaded the pics of my current board. If anyone can tell me what goes where I'll be eternally grateful! Thanks.

Front.jpg
Chinese Board
Front.jpg (208.06 KiB) Viewed 208 times

Back.jpg
Chinese Board
Back.jpg (228.16 KiB) Viewed 208 times

Planet-CNC.jpg
Planet-CNC.jpg (131.96 KiB) Viewed 208 times

Capture.JPG
USB interface control box, pg 1
Capture.JPG (83.55 KiB) Viewed 208 times

Capture1.JPG
USB interface control box, pg 2
Capture1.JPG (79.14 KiB) Viewed 208 times
NS_Dave
 
Posts: 1
Joined: 07 Aug 2017, 13:46
Controller: Mk3

Re: Swapping Chinese Controller Board

Postby pip89289 » 04 Sep 2017, 00:21

Hi Dave, I'm new to cnc too, although I can't help you with your problem, would you mind showing me the wiring to the chinese controller that you have right now? The schematic that came with my kit does not include the controller and I can't find any instructions for it. Thanks!
pip89289
 
Posts: 1
Joined: 03 Sep 2017, 00:29
Controller: Chinese clone

Re: Swapping Chinese Controller Board

Postby Support » 04 Sep 2017, 09:23

Support
 
Posts: 2631
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Electronics



Who is online

Users browsing this forum: Bing [Bot] and 1 guest