Lathe tool change

Lathe tool change

Postby Dennis » 21 Jul 2017, 22:28

I have a lathe retrofit I've used for a couple years and always have to re register each tool if the part requires a tool change (manual Aloris tool block).

My question, is there a way to call up multiple tool offsets within the program.

I've tried multiple combinations, like using an m6 (this sends the lathe on a wild excursion around the work envelope) and doesn't give me any repeatable results.

I don't need an automatic tool change but a way to call up different offsets.

Example :
G0 Z2.0
G43 T2
G0 Z.5

When I try this code it errors with "no M06"
Dennis
 
Posts: 1
Joined: 06 Jan 2014, 20:58
Controller: Many controllers

Re: Lathe tool change

Postby Support » 31 Jul 2017, 14:33

Support
 
Posts: 2657
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Mk2/4 controller



Who is online

Users browsing this forum: No registered users and 1 guest

cron