3D model or drawing of controller

3D model or drawing of controller

Postby JesperWe » 11 Apr 2014, 12:25

I have been looking around for a 3D model, or for lack of that, a drawing of the MK2 controller.
Can't seem to find anything on the site.
Is there anything available?

(I am designing an enclosure for the board and drivers)
/j
JesperWe
 
Posts: 2
Joined: 11 Apr 2014, 12:22
Controller: None

Re: 3D model or drawing of controller

Postby Support » 14 Apr 2014, 10:02

You can find DXF drawings here:

http://www.planet-cnc.com/files/Drawings.zip
Support
 
Posts: 2571
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: 3D model or drawing of controller

Postby JesperWe » 15 Apr 2014, 19:08

That's 2D only . Dimensions of RJ45 connector for cutout, placement and height of LED's for lightpipe positioning is also needed.

It would be nice too to know placement of connectors, to be able to produce an accurate 3D model.
JesperWe
 
Posts: 2
Joined: 11 Apr 2014, 12:22
Controller: None

Re: 3D model or drawing of controller

Postby Support » 16 Apr 2014, 11:40

Sorry, we don't have a 3D model.
Support
 
Posts: 2571
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: 3D model or drawing of controller

Postby jemzik » 18 Feb 2016, 12:25

Hi there
It would be nice to get dfx file including pin positions of mk 2/9 board. Same as mk2/4 and mk 3 boards have in Drawings.zip file. So it is easier to build daughter boards for it.
Thank you in advance
jemzik
 
Posts: 9
Joined: 25 Mar 2013, 08:23
Controller: Mk2

Re: 3D model or drawing of controller

Postby MiechH » 02 Mar 2016, 09:44

I agree to that. I'm designing my CNC machine in 3D modelling program. Would be very helpful to have at least a dwg/dxf with the connector-positions so that I can create a 3D model of the controller. Maybe there are users in this forum who have already done this, like to hearing from you.
MiechH
 
Posts: 10
Joined: 29 Dec 2012, 19:14
Controller: None

Re: 3D model or drawing of controller

Postby Support » 02 Mar 2016, 09:49

Support
 
Posts: 2571
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Mk2 controller



Who is online

Users browsing this forum: No registered users and 1 guest

cron