Problems with firware update

Problems with firware update

Postby wiklis » 20 Aug 2017, 01:53

I bought a used MK2 card and installed software and usb driver.
When I start the program I get asked to upgrade the firmware.
The board goes to bootloader mode , fast blinking led.
The green line goes to about 90%, then failure.
Every time.
With different computers.
With different USB cables.
With manual bootloader mode, jumper on CRTL 8/ground

Always failure

Why?
wiklis
 
Posts: 1
Joined: 20 Aug 2017, 00:42
Controller: Mk2

Re: Problems with firware update

Postby Support » 01 Sep 2017, 10:02

Support
 
Posts: 2657
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Mk2 controller



Who is online

Users browsing this forum: No registered users and 1 guest