Windows 8 driver installation

CNC USB Controller Software

Windows 8 driver installation

Postby Andrej » 27 Jun 2013, 19:16

Software and controller works great with Windows8 on 32 and 64 bit version.
But on some computers you need to install driver like this:

Invoke the Charms bar and click on Settings. Open control panel by clicking on "Change PC Settings”.

Windows 8: Select "General” and then "Advanced Startup

Windows 8.1: Select "Update and Recovery” and then "Recovery

Click "Restart now". Now the system will restart and might take some minutes to show up the boot menu. Wait for It patiently.

After some time you will be prompted with a menu with following options:
    - Continue
    - Troubleshoot
    - Turn off
Choose "Troubleshoot".

Then the following menu appears:
    - Refresh your PC
    - Reset your PC
    - Advanced Options
Choose "Advanced Options".

Then the following menu appears:
    - System Restore
    - System Image Recovery
    - Automatic Repair
    - Command Prompt
    - Windows Startup settings
Choose "Windows Startup Settings", then Click Restart.

Now the computer will restart and the boot menu appears.
Choose “Disable Driver signature Enforcement” from the menu. Now windows will start and you can do the installation of the driver.
Posts: 2489
Joined: 10 Jan 2012, 16:09
Controller: Many controllers

Return to Software

Who is online

Users browsing this forum: No registered users and 1 guest