4 Axis, Postcode and Fusion 360

CNC USB Controller Software

4 Axis, Postcode and Fusion 360

Postby PCSM-CNC » 12 Sep 2017, 08:59

Hi CNC fans.

I use a MK 3/4 Controller and Fusion 360. Postcode i got one from Internet called PlanetCNC.cps.
I want to use the 4 axis but by generate gcode i`ll get an error.

Is there an other, maybee a newer version whitch can use the 4 axis?
Somebody have a manual for programm 4 axis and gcode?

And then there is an other problem.
If i generate a gcode, basicly the G43 is written in the tap data.
I must delete the G43 by any tool cause the toolpath are wrong if i dont delete them manual.

Regards Alex from germany
Posts: 15
Joined: 28 Sep 2015, 18:50
Controller: Mk3

Re: 4 Axis, Postcode and Fusion 360

Postby Support » 03 Nov 2017, 10:44

PlanetCNC forum will be closing within next month.

There are multiple reasons, mainly spam, because of which we need to constantly maintain the forum which prevents from users have quick support.

Main support operates via support tickets on our home page: https://planet-cnc.com/support/
We really recommend that for any support questions or info regarding our products, you use this ticketing system.

You can also use our support mail at: support@planet-cnc.com

We will continue our community support forum on CNCZONE: http://www.cnczone.com/forums/planetcnc/

On CNCZONE users can discuss anything related to PlanetCNC or CNC.

PlanetCNC Support team
Posts: 2671
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Return to Software

Who is online

Users browsing this forum: No registered users and 2 guests