Many options are not available on TNG

CNC USB Controller Software

Many options are not available on TNG

Postby quangloi37 » 07 Jun 2017, 18:24

- Does not display 3D properly
- When setting acceleration and same speed, the actual machining time of TNG is longer than the old version.
- Many options are not available on TNG
Attachments
148.png
148.png (106.4 KiB) Viewed 74 times
149.png
149.png (144.95 KiB) Viewed 74 times
150.png
150.png (37.76 KiB) Viewed 74 times
151.png
151.png (115.61 KiB) Viewed 74 times
quangloi37
 
Posts: 4
Joined: 31 May 2017, 16:26
Controller: Mk3

Re: Many options are not available on TNG

Postby quangloi37 » 14 Jun 2017, 17:10

I had to downgrade back to version 1 to use.

Control algorithms make the machine run very slowly. If the speed is increased then the machine is tugged by acceleration hold.
For stable operation, the speed will be lower compared to version 1
quangloi37
 
Posts: 4
Joined: 31 May 2017, 16:26
Controller: Mk3

Re: Many options are not available on TNG

Postby Support » 15 Jun 2017, 14:18

Please post your program file. Thank you.
Support
 
Posts: 2571
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: Many options are not available on TNG

Postby quangloi37 » 16 Jun 2017, 13:32

All programs have a V2 processing time longer than V1.
I attached illustrated program and setting of V1.

V2 does not display 3D 4-axis and slower processing time.

NC file too large to attach, I send through google drive

https://drive.google.com/file/d/0B28JNb ... sp=sharing
Attachments
x39.png
x39.png (193.22 KiB) Viewed 38 times
quangloi37
 
Posts: 4
Joined: 31 May 2017, 16:26
Controller: Mk3

Re: Many options are not available on TNG

Postby Support » 20 Jun 2017, 14:20

Please also post settings file for TNG software.
Support
 
Posts: 2571
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Software



Who is online

Users browsing this forum: Bing [Bot] and 2 guests