Problems jog speed setting and OVRD

CNC USB Controller Software

Problems jog speed setting and OVRD

Postby off.messina » 11 May 2017, 14:11

Hello

Why the speed and jog and ovrd of the axes do not exceed the value of 2711.20? I need the axes to go faster but I can not. Where am I wrong?
Attachments
settaggio iniziale.setting
This is my setup:
(49.49 KiB) Downloaded 13 times
off.messina
 
Posts: 1
Joined: 15 Feb 2017, 09:24
Location: Cava de' Tirreni (Salerno)
Controller: Mk3

Re: Problems jog speed setting and OVRD

Postby Support » 17 May 2017, 09:07

You have a very high Steps Per Units Value for all three axes.
Since max speed of machine is conditioned by steps per units values and step rate of controller max speed of your machine is 2711. I would recommend that you lower your steps per unit values, cca. 1600.
Support
 
Posts: 2631
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to Software



Who is online

Users browsing this forum: No registered users and 3 guests

cron