Need help with connecting controller with stepper driver

General topics about everything that doesn't fit elsewhere.

Need help with connecting controller with stepper driver

Postby BIRUK » 10 Oct 2017, 14:56

Hi their
Its BIRUK
I bought Usb cnc kit from RATTM MOTORS , Know i got trouble on connecting motor driver with the controler.
my controler is UCNCV4, FMD2740C stepper driver, the controller has only 4 Pins connections CK+,CK-,Dir+,Dir- But the stepper driver has 6 Pins Sp+, Sp-, Dir+, Dir-, EN+,EN-, SO where should i attach the "Enable Pins"?
the controller manual says it uses ANODE COMMON connection, the motors didnt move it looks like in HOLDING STATE Hard to rotate . the kit uses Only Planet CNC Software
since this is my first cnc project i need help
I Hope the support stuff give me solution on it
Thanks
BIRUK
 
Posts: 1
Joined: 09 Oct 2017, 18:10
Controller: Mk1

Re: Need help with connecting controller with stepper driver

Postby Support » 19 Oct 2017, 11:57

PlanetCNC forum will be closing.

There are multiple reasons, mainly spam, because of which we need to constantly maintain the forum which prevents from users have quick support.

Main support operates via support tickets on our home page: https://planet-cnc.com/support/
We really recommend that for any support questions or info regarding our products, you use this ticketing system.

You can also use our support mail at: support@planet-cnc.com

We will continue our community support forum on CNCZONE: http://www.cnczone.com/forums/planetcnc/

On CNCZONE users can discuss anything related to PlanetCNC or CNC.


PlanetCNC Support team
Support
 
Posts: 2671
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to General topics



Who is online

Users browsing this forum: No registered users and 1 guest