help me

General topics about everything that doesn't fit elsewhere.

help me

Postby crazyjoker7070 » 10 Jul 2017, 16:08

The job is half done. How to start from where you left off?
Posts: 2
Joined: 10 Jul 2017, 15:55

Re: help me

Postby Support » 01 Aug 2017, 14:44

Posts: 2631
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Re: help me

Postby pgpilger » 13 Oct 2017, 03:21

I have just purchased the 3040 cnc and having a hard time getting it to jog.I have the USB working with the controler
Posts: 1
Joined: 13 Oct 2017, 03:08

Re: help me

Postby Support » 19 Oct 2017, 11:56

PlanetCNC forum will be closing.

There are multiple reasons, mainly spam, because of which we need to constantly maintain the forum which prevents from users have quick support.

Main support operates via support tickets on our home page:
We really recommend that for any support questions or info regarding our products, you use this ticketing system.

You can also use our support mail at:

We will continue our community support forum on CNCZONE:

On CNCZONE users can discuss anything related to PlanetCNC or CNC.

PlanetCNC Support team


Looks like you have one of Chinese counterfeit boards: viewtopic.php?f=2&t=520
We do not support these boards and therefore we cannot be responsible for any hardware or license malfunction. You should turn to support and help to your merchant/seller that sold you this product.

‚ÄčLicense that was included(usually on a CD) is pirated and we do not allow it.

These boards are based on our first Mk1 controller which is obsolete and is not supported.
Many of its features are outdated and there is no software/firmware development.
It has a small buffer and weak processor, which reflects on bad machine performance.

You can purchase original controller or license in our web shop:
Posts: 2631
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Return to General topics

Who is online

Users browsing this forum: No registered users and 2 guests