DIY non talks to the PC

DIY non talks to the PC

Postby Andrea_E636 » 06 May 2015, 06:48

Ciao a tutti,
I just realized the card DIY all self-built.
The PIC has been programmed correctly.
I reprogrammed the PIC with other SW semple downloaded from the site.
Unfortunately no signs of life.
I checked the power supply, the 4 feet of PIC is correct.
I checked the quartz and oscillates regularly.
But the PC with WIN8 does not see the card that is powered directly from the PC.
Sorry for any errors, but I used an online translator.
thanks

Andrea
Andrea_E636
 
Posts: 4
Joined: 06 May 2015, 06:32
Controller: DIY Mk1

Re: DIY non talks to the PC

Postby Support » 06 May 2015, 06:58

Is CNCUSB controller visible in Device Manager?

Have you installed the driver for Win8 correctly?
http://forum.planet-cnc.com/viewtopic.php?f=5&t=898
Support
 
Posts: 2577
Joined: 07 Apr 2014, 17:39
Controller: Many controllers


Return to DIY



Who is online

Users browsing this forum: No registered users and 2 guests