XHC WHB03 WHB04 mpg support

Jogging keyboard, output board, MPG pendant, adapters, ...

Re: XHC WHB03 WHB04 mpg support

Postby jarekk » 08 Jul 2015, 08:02

Has anyone seen this one ?
Zdjęcie-0071.jpg
Zdjęcie-0071.jpg (110.93 KiB) Viewed 1108 times


Marked as PHB03-S

A bit different data structures ( more like WHB04 )

Code: Select all
struct   phb03_out_data
{
   /* header of our packet */
   uint16_t   magic;
   /* day of the month .. funny i know*/
   uint8_t      day;
   /* work pos */
   uint16_t   x_wc_int;
   uint16_t   x_wc_frac;
   uint16_t   y_wc_int;
   uint16_t   y_wc_frac;
   uint16_t   z_wc_int;
   uint16_t   z_wc_frac;
   /* machine pos */
   uint16_t   x_mc_int;
   uint16_t   x_mc_frac;
   uint16_t   y_mc_int;
   uint16_t   y_mc_frac;
   uint16_t   z_mc_int;
   uint16_t   z_mc_frac;

   /* markers */
   uint8_t    step_mul;
   uint8_t    wheel_mode

};



Different coding for values ( here from value with 0.001 units)

Code: Select all
void whb04_cnv(int32_t value,uint16_t * v_int,uint16_t * v_fr)
{
   uint16_t neg = 0;

   if(value < 0)
   {
      neg = 0x8000;
      value = -value;
   }

   *v_int = value / 1000;
   *v_fr  = (value %1000)*10 | neg;

}


Same coding for step_mul, wheel_mode like this:

0x10 - flash yes/no leds
0x40 - show 'A:'
0x80 - show 'inch' instead of 'mm'

I was unable to switch it to speed/feedrate display ( not sure it supports it).
Maybe someone had more luck ?
jarekk
 
Posts: 1
Joined: 08 Jul 2015, 07:54
Controller: Many controllers

Re: XHC WHB03 WHB04 mpg support

Postby astroas » 28 Sep 2016, 22:43

Has anyone used the WHB04B?
WHB04B.jpg
WHB04B.jpg (115.41 KiB) Viewed 760 times

I would like to use it in my own project and trying to work out how to write to the LCD.
The HID Set Feature Request data structure is different to the WHB04.
astroas
 
Posts: 1
Joined: 28 Sep 2016, 22:19

Re: XHC WHB03 WHB04 mpg support

Postby panimac » 16 Nov 2016, 12:00

jhoexp wrote:Well, the comunication works from mpg to usbcnc, but the display on the pendant doesn't.


Hi, i have the same issue... Tried to fix it with fix_entries.reg like "Moonglow" said but still not working.

Anyone know if there is a way fix the problem?
panimac
 
Posts: 6
Joined: 08 Oct 2016, 11:10
Controller: Mk3

Re: XHC WHB03 WHB04 mpg support

Postby t991731 » 19 Apr 2017, 13:54

It seems to be a dead thread, but has anyone tried this with the TNG software?
t991731
 
Posts: 4
Joined: 27 Feb 2017, 15:15
Controller: None

Re: XHC WHB03 WHB04 mpg support

Postby Support » 21 Apr 2017, 10:35

This pendant is not supported with PlanetCNC controllers.
Support
 
Posts: 2655
Joined: 07 Apr 2014, 17:39
Controller: Many controllers

Previous

Return to Accessories



Who is online

Users browsing this forum: No registered users and 1 guest