Where to buy mills etc.

Machine design, rails, bearings, screws, nuts, couplings, ...

Where to buy mills etc.

Postby grawsom » 06 Feb 2012, 10:36

Hi

Now it's allmost time to get some milling done, but only have a small one for graving...

Are there anyone who could recommend a place in EU, maybe a beginer set...
grawsom
 
Posts: 53
Joined: 25 Jan 2012, 17:29
Location: Denmark
Controller: Mk2

Re: Where to buy mills etc.

Postby m_thread » 06 Feb 2012, 12:58

Hi if it is end mills you mean (milling bits), (pinnfräs på svenska) you could buy them from sorotech.de, or cnc-plus.de. Since you live in Denmark the shipping will probably be quite fast and cheap.

Edit: It should be sorotec.de
/F
Last edited by m_thread on 09 Feb 2012, 09:01, edited 1 time in total.
m_thread
 
Posts: 113
Joined: 20 Jan 2012, 14:04
Location: Stockholm, Sweden
Controller: Mk2/4

Re: Where to buy mills etc.

Postby grawsom » 09 Feb 2012, 07:30

Thank's Fredrik

I will take a look at these sites...
grawsom
 
Posts: 53
Joined: 25 Jan 2012, 17:29
Location: Denmark
Controller: Mk2

Re: Where to buy mills etc.

Postby grawsom » 14 Feb 2012, 12:29

What are the most common used tools for CNC - have to start from scratch with tools...
grawsom
 
Posts: 53
Joined: 25 Jan 2012, 17:29
Location: Denmark
Controller: Mk2

Re: Where to buy mills etc.

Postby Andrej » 14 Feb 2012, 12:43

I mostly use:
EndMill 2mm
EndMill 3mm
EndMill 6mm
EndMill 8mm
BallNose 1.5mm
BallNose 3mm
V-bit 36deg, 0.2mm

I'm also interested what others use.
Andrej
 
Posts: 2489
Joined: 10 Jan 2012, 16:09
Controller: Many controllers

Re: Where to buy mills etc.

Postby matherp » 15 Feb 2012, 10:44

I'm doing mostly aluminium work (upto 12mm thick). I use single flute cutters like Onsurd 3/16 x 5/8 SE UC Spiral o' flute cutter which I buy online from cutter-shop.com who have a large selection

Best regards

Peter
matherp
 
Posts: 22
Joined: 15 Jan 2012, 19:51
Location: Cambridge, UK
Controller: DIY Mk1

Re: Where to buy mills etc.

Postby Kristof » 29 Feb 2012, 11:39

What is the best tool to cut a slot in 3/8" thk aluminum?
Kristof
 
Posts: 144
Joined: 18 Jan 2012, 16:11
Location: Illinois
Controller: Mk1

Re: Where to buy mills etc.

Postby alexbailey » 04 Jun 2012, 10:48

Hi

Ai-TEC - your leading source of cnc milling. It allows you to manufacture precision-machined components using turning and milling machinery.
alexbailey
 
Posts: 1
Joined: 04 Jun 2012, 10:46


Return to Mechanics



Who is online

Users browsing this forum: No registered users and 2 guests